Share
Pin
Tweet
Send
Share
Send
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri.jpg)
Despite the apparent complexity, this bird is easy to do. See how it looks good among the green! To do this, take thick paper - it will hold its shape better. And there are few bends in this craft.
Hummingbird is made from a triangle. To do this, fold the square sheet diagonally in half and cut it.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-2.jpg)
You do not need a second triangle.
Lay the workpiece in a right angle down. Fold in half and re-deploy.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-3.jpg)
Fold the sides to the middle.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-4.jpg)
Fold again to the center line, but from below.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-5.jpg)
Expand.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-6.jpg)
Open the top sheets. Inside you will see the folds. Bend the sides along them inward.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-7.jpg)
And lower the upper movable part of the workpiece down. So do the right side.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-8.jpg)
You have such a figure.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-9.jpg)
Bend it in the center line back.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-10.jpg)
Fold the top of the craft at a right angle down. There will be a thickening at the fold, but it should be so. Just press that place well.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-11.jpg)
Flatten the part.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-12.jpg)
Fold the bottom of the top sheet in half - from the fold to the center line.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-13.jpg)
Grasp the bottom fold and pull it up. The center vertical line should be in a horizontal position.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-14.jpg)
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-15.jpg)
And you should get such a rhombus.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-16.jpg)
On the other side of the figure do the same.
Unscrew the top of the rhombus and draw a line at a right angle from the middle of the rhombus to the outside of the upper triangle.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-17.jpg)
At the bottom of the figure, draw a horizontal line to the middle of the craft.
Bend parts along these lines.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-18.jpg)
Draw tucks above these lines.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-19.jpg)
Bend them too.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-20.jpg)
Fold the upper "tuck" inward.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-21.jpg)
Bend the lower sharp part of the figure with a step.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-22.jpg)
Now turn the shape clockwise 90 degrees.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-23.jpg)
Large rhombic wings appeared at the top.
Shape the head of a bird. Draw a line below the fold.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-24.jpg)
Bend it a step.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-25.jpg)
Expand the edge of a sharp corner. Bend its sides from the sides inward. You will get a sharp beak. Grasp the beak and head and bend the part inward along the lower fold.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-26.jpg)
You will get the head of a bird.
Screw the edges of the wings outward onto the pencil. Draw the eyes.
![](http://img.uaft2404.org/img/sdela-2019/kak-sdelat-ptichku-kolibri-27.jpg)
You got a hummingbird.
Share
Pin
Tweet
Send
Share
Send