Hair clip "Ladybug"

A hair clip in the form of a charming ladybug will definitely decorate the hairdo of even the most finicky young fashionista.
To make a Ladybug hairpin you need to prepare:
- scissors.
- Satin ribbons in two shades: black and red.
- glue gun.
- half beads of black color.
- hairclip.
- thread and needle for manual work.
- a lighter.
Sequence of making hair clips.
Two shades of satin ribbons must be cut into identical square blanks, the sides of which should be equal to 5 cm.
Then they need to be folded in half, while receiving triangles.
Now you need to wrap the right corners to the middle of the parts and hold in this position.
Then repeat the action, but now from the left.
In the center of the workpiece, two fold lines are assembled. Along these folds, each blank should be folded in half.
Now thin and slightly uneven corners need to be cut.
Singeing the created sections with the lighter fire, the edges of the parts that have not been processed must be leveled, cutting off all excess tape.
After this, it is necessary to scorch the lower sections, but be sure to ensure that the edges of the tapes are divided into two equal parts.
Now the parts are completely ready, it remains to deploy them with the front side.
Similar details should be prepared 7 black and 26 red.
Now 4 red parts need to be paired.
Then, on two sides of one black part, these double blanks should be glued.
The first row of parts is ready. In the second, it is necessary to repeat the number of red and black parts and fix them to the upper edges of the blanks of the previous row.
And at the edges it remains only to add one more red blank. On this the second row will be completed.
The next row will require two black paired blanks and 4 paired red parts.
After that, they should be attached to the top of the details of the second row, always matching the colors.
The fourth row will require the same number of red paired parts and three separate blanks in black.
All prepared paired and single parts must be fixed in accordance with the shades of the tapes.
On this little body of a ladybug is ready, it remains to arrange the head. It is made from a square of black satin ribbon. It must be folded in half, to form a triangle.
Now the addition needs to be fixed, for this using ordinary sewing threads creating small stitches, two layers of tape should be sewn.
Then, without cutting the threads, gently pull the thread slightly, creating several folds. After this, having made several fastening loops, the thread can be cut.
Now the slices must be carefully scorched.
It turns out here is such a head for decoration. It must be fixed at the beginning of the first row of the ladybug body.
Next, the decoration needs to be deployed with the bottom side and with two pieces of black tape to seal the places for bonding all the details.
Then, in the middle of the ladybug, you need to fix the prepared hair clip.
It remains only to turn the part over and decorate it with half beads. On the head of the bug you need to glue two beads that replace the eyes. 4 black beads should be glued to each wing.
The ladybug barrette is ready!