Share
Pin
Tweet
Send
Share
Send
Chair shock absorber repair
It is almost impossible to repair the shock absorber so that it can be adjusted in height. But you can fix it at the right height. To perform the work you will need a Phillips screwdriver, a hacksaw for metal, a plastic or metal pipe with a diameter of 25 mm., A small spring.
To start the repair, you need to disconnect the seat with backrest from the base. To do this, you will need a Phillips screwdriver. With it, you need to unscrew the 4 fixing bolts and remove the seat with the back to the side. Then you need to disconnect the shock absorber from the wheelbase of the chair. He keeps on one clip.
This clip is easily removed with the same Phillips screwdriver. After that, you can start repairing the shock absorber, or rather, fixing it at the required height.
To fix the chair at the desired height, a spacer must be made under the shock absorber. For this, you can use a metal or plastic pipe with a diameter of not more than 25 mm.
If the diameter of the pipe is larger, then the base of the shock absorber can slip into it. A hacksaw for metal, you need to saw off the necessary piece of pipe. Then put this pipe on the shock absorber rod so that it abuts against the base of the shock absorber.
To prevent the chair from being too rigid, a spring can be inserted between the pipe and the base of the shock absorber. After that, assemble all the parts into a single whole in the same order in which it was disassembled.
Share
Pin
Tweet
Send
Share
Send