Do you often use a thermogun? Then make yourself a convenient and practical organizer made of wood or plywood. It provides a shelf for glue sticks, there is a mount for the thermal gun itself, and there is also a shelf for an associated tool.
The first step is to saw off two boards (or two pieces of plywood) in size. Of these, the master makes the side walls of the organizer.
It will be necessary to cut a small piece from the boards, and then make cuts with a grinder with a disk on a tree. Shallow saws are needed - literally 2-3 mm. They can be made with the usual manual hacksaw.
The main stages of work
Next, you will need to make a glass for a thermo gun. For this, the author uses a piece of plastic pipe. A wooden plug is inserted on one side. Then it will be necessary to drill two more holes with a step drill.
At the next stage, the wizard starts assembling the organizer itself. First, insert a piece of plywood approximately 6 mm thick into the grooves in the side walls. After that, the remaining workpieces are attached.
Then, to the upper back side of the organizer, the master screws a wooden rail on the screws, which has a 45 degree cut along the entire length. The same rail must be fixed to the desktop.
Details on how to make an organizer out of wood for storing the glue sticks of a thermal gun can be found in the video on our website.
