In this review, the author demonstrates how to make a simple gasoline burner for home use with your own hands. To make a miniature "version" of this device, you will need a 20 ml glass syringe, as well as a compressor for the aquarium.
Unlike purchased Chinese mini gasoline burners, in the home-made version there is simply nothing to break, so this device will last a long time. And the cost of components necessary for the manufacture of the burner is minimal.
The first step is to fill the syringe with medical cotton. Then in the cork from a plastic bottle you need to drill a hole. A check valve from the aquarium compressor is inserted into it, and fixed with epoxy glue.
Why not use hot melt adhesive? The fact is that it is destroyed under the influence of gasoline vapors. Therefore, hot melt in this case will not work.
The process of manufacturing a gasoline mini burner
The next step is to glue the plastic cap with a check valve to the glass syringe. While the epoxy glue will dry, you can prepare the remaining parts.
First you need to bend the needle slightly. To do this, it must be heated red at the bend. And so that the needle does not break during bending, the author inserts a piece of wire into it.
At the end of the needle, it will be necessary to fix a spiral of steel wire - without it, a gas torch simply will not work normally, since the flame will constantly go astray.
Then it remains only to connect the aquarium compressor and pump a little gasoline into the syringe. This can be done with a conventional medical syringe.
