Share
Pin
Tweet
Send
Share
Send
To make such a gum with a camomile you will need:
- a large elastic band for light green hair.
- scissors.
- satin ribbon in green and white.
- beads of light brown color.
- thermal gun with a spare rod.
- lighter.
- contour for yellow fabrics.
The sequence of manufacture of jewelry.
To start, we cut the tape with a width of 5 cm into the same square parts. Their sides should be 5 cm each. Such details will require 12 white and 4 green.
From white details we prepare the petals for chamomile. To do this, we add each blank of a white tone along its diagonal between two opposite angles, resulting in a triangle.
Now deploy them with the long side up, for the convenience of further work.
We take an acute angle from the left edge and carefully bend, directing to the center of the part, while combining the slices.
Then repeat the action on the right side of the white parts.
In the middle of each part, two fold lines were obtained. Now the blanks need to be folded in half along these pairs of lines.
On one side of the parts all sharp corners are combined, which we cut off and carefully singe with fire.
Next, we align the remaining unprocessed sections, cutting off their excess and singeing off the edges.
Carefully straighten the details and get the petals with a rounded edge.
We begin to create chamomile leaves. To do this, take the green squares and bend them in half, forming a regular triangle.
Then we fold each piece in half twice more, forming multilayer triangular parts.
We trim thin uneven corners, immediately burning new sections with fire.
We cut the excess length of the remaining sections, immediately singeing them, forming the length of the leaves.
As a result of these actions, we get these green leaves for chamomile.
Now we collect the flower, glue all the details with hot glue. We collect in a small circle all 12 white petals and three green leaves.
Gently fill the resulting void in the middle with glue, trying not to stain the petals, and fill it with light brown beads.
After waiting for the glue to dry, turn the daisy over. From the remaining green square, cut out an even circle, burn the cut so that the fabric does not crumble. Then we lubricate the part with glue and attach it to the bottom of the chamomile, while closing all the lower edges of the petals.
It remains only to fix the elastic band for the hair in the center of the chamomile.
With a contour with yellow sparkles we draw an even line around the middle of the daisy bead. We complement the flower with a small ladybug.
Decoration is ready!
Share
Pin
Tweet
Send
Share
Send